Their particular shape is used in Magnetic Shiner machines only for the shining step, especially when there are internal surfaces impossible to reach by hand.
The steel quality of the stainless steel balls is AISI 420/C norm guaranteed against oxidation, when used with MF products. To be used in the vibration and rotation machines with water and surface-active compounds only for Me shining step.
The steel quality of the stainless steel planet gears is AISI norm guaranteed against oxidation, when used with MF products. They are used when you need a penetration on the undulated shapes. To be used mixed with balls, needles and stubs in the vibration and rotation machines with water and surface-active compounds (VILUX).
Walnut shells of different dimensions for a different finishing grade. Used normal or impregnated with abrasive past or oil.
Various grade of per-formed plastic and ceramic. Different forms and grades of abrasion for different abrasive effects on different materials.
It is a liquid compound used to shine with stainless steel products, such as balls, needles, planet gears, stubs and cylinders, used normally in the tumbling with vibration or rotation, especially in the jewellery field.
It is a slightly acid product for polishing brass, copper, bronze, alpacca, inside the vibrator with balls. It can be rinsed very easily, free of unpleasent odours.
It is a neutral liquid compound used to shine with the stainless steel products, such as balls, needles, planet gears, stubs and cylinders, used normally in tumbling with vibration or rotation, especially for steel, monel and nickel silver products, titanium and aluminum.
It is a liquid compound used to degrease stainless sleet products, such as balls, needles, planet gears, stubs and cylinders, used normally in the tumbling with vibration or rotation. Also available in powder form.
Pastes at various grain and oils with different characteristics used in mixtures with abrasive products. Products suitable for tumbling to get effects of large and fine grinding or polishing.
MACROBRILL is a product that, combined with the shining compounds suitable for each type of metal, has the remarkable advantage to eliminate the problem of oxidation that usually involves the traditional stainless steel balls AISI 420. With this product there is no transfer or oxidized metal during the process, therefore no more acid degreasing and a minor discharge of water to drain.
The remarkable hardness and the low specific gravity permit to obtain a very fine finish without the "orange peel" phenomenon that frequently involves the traditional treatments with stainless steel balls.
Another important characteristic of this material is that it allows the processing of very thin and fragile objects (i.e.: in the gold industry, the "gap"), assuring with one single step smoothing and shining without modifying the colour, emphasising the natural characteristics of the metal.
This cylindrical shape is used when you need a penetration on right angles or undercut shapes. They are used mixed with balls, planet gears and stubs in the vibration and rotation machines with water and surface-active compounds for the shining step.
Delmer's Finishing Division has a number of machines for grinding, polishing, cleaning, degreasing and washing of the mechanical parts, and in general. Hardware and equipment.
In the field of Jewellery, these machines are used for fine surface finishing. washing and also cleaning of semi-finished plaster casting of the cylinders.
Delmer-Metal Finishing is a result of collaboration between Delmer and Metal Finishing. Established in 1975, Metal Finishing is a renowned Italian company and has been a part of the OPOEL GROUP since 2007.